xtranjero
Miembro de la Vieja Guardia
Que les parece esta semiautomatica Cezka en calibre 7.62 x 25 , de las cuales al parecer solo se hicieron 200,000 ....
Hace algunos años tuve una de esas...en regulares condiciones, pero por falta de municiones la vendi en lo que la compre...
None of the early prototypes were found to be acceptable and in 1950 Ceska Zbrojovka (Bohemian Arms Factory) concentrated it's efforts on a design based on the Russian 7.62x25mm caliber. Initial tests in 1951 on this design were also unsatisfactory.
An improved pistol was tested again in early 1952 and was adopted by the Czech Armed Forces in May of 1952 as the Model 52 (or CZ- 52). The contract for the Model 52 began in 1952 and was completed in 1954. Exact quantities produced are unknown but estimated at between 200,000 and 220,000 pistols.
The Model 52 employs a roller locking system thought to have been inspired by the German MG-42 machine gun. Roller locking designs have also been used successfully for years on many Heckler and Koch rifles but are seldom seen on pistols. The Model 52 has a three position frame mounted safety lever. In the downward position a red dot is visible and the pistol is ready to fire. In the middle position the safety blocks the trigger bar and engages the hammer rebound notch. In this "safed" position the pistol can be carried cocked & locked or safely unloaded. Pushing the lever all the way up decocks the pistol. The magazine is held in place by a lever at the bottom rear of the magazine well. There is no magazine safety. Originally manufactured with a nice light grey parkerized finish many CZ-52's can be found on the surplus market with a dark blue (hot dipped) finish. These pistols were part of a refurbishment program in the late 70's and can also be identified by the letters "VOZ" plus the year of re-work stamped above the trigger.
Hace algunos años tuve una de esas...en regulares condiciones, pero por falta de municiones la vendi en lo que la compre...
None of the early prototypes were found to be acceptable and in 1950 Ceska Zbrojovka (Bohemian Arms Factory) concentrated it's efforts on a design based on the Russian 7.62x25mm caliber. Initial tests in 1951 on this design were also unsatisfactory.
An improved pistol was tested again in early 1952 and was adopted by the Czech Armed Forces in May of 1952 as the Model 52 (or CZ- 52). The contract for the Model 52 began in 1952 and was completed in 1954. Exact quantities produced are unknown but estimated at between 200,000 and 220,000 pistols.
The Model 52 employs a roller locking system thought to have been inspired by the German MG-42 machine gun. Roller locking designs have also been used successfully for years on many Heckler and Koch rifles but are seldom seen on pistols. The Model 52 has a three position frame mounted safety lever. In the downward position a red dot is visible and the pistol is ready to fire. In the middle position the safety blocks the trigger bar and engages the hammer rebound notch. In this "safed" position the pistol can be carried cocked & locked or safely unloaded. Pushing the lever all the way up decocks the pistol. The magazine is held in place by a lever at the bottom rear of the magazine well. There is no magazine safety. Originally manufactured with a nice light grey parkerized finish many CZ-52's can be found on the surplus market with a dark blue (hot dipped) finish. These pistols were part of a refurbishment program in the late 70's and can also be identified by the letters "VOZ" plus the year of re-work stamped above the trigger.
Adjuntos
Última edición: